Non-Aircraft Engine Fuel System Components: 7C9665, 7CA231, 7E3384
| MFG SKU | NSN | Item Name | Details | Manufacturer (CAGE) | RFQ |
|---|---|---|---|---|---|
| 7C9665 | 2910-01-437-6821 | Pump, Fuel, Metering and Distribut | Caterpillar Inc. (11083) | ||
| 7C9748 | 2910-01-550-8566 | Pump, Fuel, Metering and Distribut | III End Item Identification: Used on caterpillar heavy duty equipment | Caterpillar Inc. (11083) | |
| 7C9966 | 2910-01-346-5404 | Insert, Fuel Pump | General Characteristics Item Description: Circular shaped with threaded ends; part of fuel injection pump system | Caterpillar Inc. (11083) | |
| 7CA231 | 2910-01-104-9993 | Housing, Governor, Diesel Engine | III End Item Identification: Tractor; caterpillar inc; model 613C General Characteristics Item Description: Lobe mounting; with dowels and seals | Oshkosh Corporation (45152) | |
| 7CA282 | 2910-01-105-1265 | Camshaft, Metering and Distributi | General Characteristics Item Description: 4 cams; shaft, 8.023 in. lg; keyway drive type; 3.500 in. 0D; 8.648 in. O/a lg | Oshkosh Corporation (45152) | |
| 7CA291 | 2910-01-104-9318 | Cover, Torque Spring | Oshkosh Corporation (45152) | ||
| 7CA296 | 2910-01-104-7558 | Flange, Fuel Inlet | III End Item Identification: Oshkosh truck, P/N AS32H-6A, model 40K, nsn 3930-00-800-3929 General Characteristics Item Description: ALUMINUM;0.755 in. id;two mtg holes, 0.280 in. dia, spaced 2.344 in. C to c;working pressure 40.0 psi | Oshkosh Corporation (45152) | |
| 7CA301 | 2910-01-105-2712 | Cover, Fuel Pump Housing | General Characteristics Item Description: Material steel; 8.38 mm thk; all corners 10.5 mm radius | Oshkosh Corporation (45152) | |
| 7CA307 | 2910-01-104-9995 | Lever, Shaft Connecting | General Characteristics Item Description: Steel; 47.88 mm long, 14.98 mm wide, 10.01 mm high; clamp end 8.992 mm dia, tapped for 8-32-2B thd screw; other end slotted | Oshkosh Corporation (45152) | |
| 7CA310 | 2910-01-105-3609 | Lever, Shut off | General Characteristics Item Description: Material, steel, zincplated; 32.812 mm O/a lg, 18.8 mm O/a width | Oshkosh Corporation (45152) | |
| 7CA312 | 2910-01-104-7559 | Governor Housing Fuel Shut off | General Characteristics Item Description: Consist of part number 4N934, housing, 1 each and part number 4N3713, seal, 1 each | Oshkosh Corporation (45152) | |
| 7CA342 | 2910-01-105-3610 | Lifter, Fuel Pump Plunger | General Characteristics Item Description: 17.462 mm O/a dia; slotted 3.96 mm wide, 1.582 mm deep, 21.09 mm long | Oshkosh Corporation (45152) | |
| 7CA402 | 2910-01-105-9929 | Housing, Fuel Pump | III End Item Identification: Truck, lift, fork; caterpillar inc; model V-200 Media for Which Designed: Fuel, diesel Engine Model Number for Which Designed: 3208 | Oshkosh Corporation (45152) | |
| 7CA94 | 2910-01-106-0446 | Bell Crank | Counterbore Diameter: 0.590 inches nominal Counterbore Depth: 0.068 inches nominal Bore Diameter: 0.378 inches nominal | Oshkosh Corporation (45152) | |
| 7CA97 | 2910-01-104-6380 | Lever Assembly | III End Item Identification: Caterpillar engine model 3306, nsn 2815-00-610-7598 General Characteristics Item Description: Consists of caterpillar P/N 9N982, lever 1;P/N 9N981, spacer 1 | Oshkosh Corporation (45152) | |
| 7D3839 | 2910-00-028-9935 | Parts kit, Valve | General Characteristics Item Description: Consists of O-ring 2; spring helical compression 1; boot 1; packing felt 1; packing preformed 1; gasket 1; disk 1; tube of grease 1 | Caterpillar Inc. (11083) | |
| 7D6005 | 2910-01-058-9151 | Nipple Assembly | Caterpillar Inc. (11083) | ||
| 7D8059 | 2910-01-058-9155 | Seal kit, Vent | Caterpillar Inc. (11083) | ||
| 7E3129 | 2910-01-570-1270 | Cover, Fluid Filter | III End Item Identification: Motor, serial number 8RB618 | Caterpillar Inc. (11083) | |
| 7E3384 | 2910-01-355-7787 | Injector Assembly, Fuel | Caterpillar Inc. (11083) |