Non-Aircraft Miscellaneous Engine Accessories: 7010082, 701112N0NMAG, 701190
| MFG SKU | NSN | Item Name | Details | Manufacturer (CAGE) | RFQ |
|---|---|---|---|---|---|
| 7010082 | 2990-01-459-9289 | Nozzle, Smoke Genera | III End Item Identification: AAV7A1-RAM Special Features: Next higher assy 2350-01-081-8138 Overall Length: 3.770 inches nominal | Marine Corps Systems Command (0MLM6) | |
| 70101-0003 701010003 | 2990-01-173-1255 | Governor Assembly, Air Compressor | III End Item Identification: Dempster dumpster model GRD304F3 | White Motor Corp. (65282) | |
| 701054A | 2990-00-403-6048 | Lever, Governor | General Characteristics Item Description: Waukesha motor co, part no. 701054 | Dresser Inc. (64104) Viking Incorporated (1EN78) | |
| 701056 | 2990-00-090-8833 | Piston, Diaphragm | General Characteristics Item Description: Cast aluminum, 1.812 in. od, 1.500 in. id, 0.938 in. lg, 0.500 in. hole through center of closed end | Dresser Inc. (64104) | |
| 701101NM | 2990-00-891-8441 | Starter, Engine, Air | III End Item Identification: Electro-motive div of gmc, diesel engine, mdl series 645E, 16E and sr General Characteristics Item Description: W/spring and gear drive mechanism; rated at 34.7 hp and 200.0 psi air pressure; magnetic permeability shall be less than 1.2 before fabrication and not greater than 2.0 after fabrication as measured in a 200 oersted field | Dresser Inc. (64104) | |
| 701105 | 2990-00-891-7951 | Governor, Diesel Engine | Reference Number Differentiating Characteristics: Magnetic permeability shall be less than 1.2 before fabrication and not greater than 2.0 after fabrication as measured in a 200 oersted field | Dresser Inc. (64104) | |
| 701105A | 2990-00-407-1166 | Governor, Diesel Engine | III End Item Identification: Governor hyd deng regg | Dresser Inc. (64104) | |
| 701112N0NMAG | 2990-00-891-7949 | Power Takeoff, Engine | General Characteristics Item Description: 15 7-8 in. dia, 18 1-16 in. lg, capable of transmitting 50 bhp minimum at 2300 rpm | Dresser Inc. (64104) | |
| 701113 | 2990-00-010-7998 | Air Actuator | Special Features: Magnetic permeability shall be less than 1.2 before fabrication and not greater than 2.0 after fabrication as measured in a 200 oersted field for rod end a only | Dresser Inc. (64104) | |
| 701117 | 2990-00-891-8374 | Valve, Relay | Special Features: As differentiated by magnetic permeability shall be less than 1.2 before fabrication and not greater than 2.0 after fabrication as measured in A 200 oersted field General Characteristics Item Description: Sealco air brakes inc, part no. 6900NM | Dresser Inc. (64104) | |
| 701118 | 2990-00-891-8422 | Valve, Air Starter C | End Item Identification: Avenger class mcm | Dresser Inc. (64104) | |
| 7011198 | 2990-00-143-4352 | Control Assembly, Push-Pull | Effective Length: 43.000 inches minimum and 43.188 inches maximum Core Construction: Single wire Core Material: Steel | Dresser Inc. (64104) | |
| 701119A | 2990-00-143-4352 | Control Assembly, Push-Pull | Effective Length: 43.000 inches minimum and 43.188 inches maximum Core Construction: Single wire Core Material: Steel | Dresser Inc. (64104) | |
| 701119B | 2990-00-143-4352 | Control Assembly, Push-Pull | Effective Length: 43.000 inches minimum and 43.188 inches maximum Core Construction: Single wire Core Material: Steel | Dresser Inc. (64104) | |
| 70-1125 701125 | 2990-00-872-4001 | Cap Assembly, Protective, Muffler- | III End Item Identification: Project manager-mobile, usa materiel command, generator set, model MEP006A Material: Steel corrosion resisting Pipe Outside Diameter Accommodated: 3.750 inches | Department of Defense Project (30554) | |
| 70-1169 701169 | 2990-00-148-7494 | Muffler, Exhaust | Engineered Electric Company (93742) | ||
| 701169 | 2990-00-096-9435 | Weight, Governor | General Characteristics Item Description: Cast iron, 1.156 in. approx O/a lg, 1.0625 in. approx O/a W | Dresser Inc. (64104) | |
| 701182 | 2990-01-392-6759 | Connector, Exhaust Pipe | TRI-EX Tower Corp. (12058) | ||
| 701187 | 2990-00-105-3238 | Spool, Governor | Dresser Inc. (64104) | ||
| 701190 | 2990-00-080-9814 | Rod, Push | General Characteristics Item Description: Stainless steel, type 316, 0.625 in. dia, 2.344 in. lg, 0.490 in. min, 0.500 in. max dia hole running 1.313 in. through center of rod, 0.125 in. dia hole through one side of rod 0.750 in. from end | Dresser Inc. (64104) |